We acquired 3 × 3-mm images centered on the fovea using the RTVue-XR Avanti system (Optovue Inc., Fremont, CA, USA) with split-spectrum amplitude-decorrelation angiography software.
26 The foveal avascular zone (FAZ) parameters (i.e. FAZ area and FAZ perimeter), were calculated automatically by the built-in software (AngioVue version 2018.0.0.18). To analyze the choriocapillaris microcirculation, two sets of high-quality OCTA images were obtained from each eye (image quality, >7/10). After image acquisition, we excluded eyes with movement or shadow artifacts on the OCTA images. The retinal pigment epithelium (RPE) layer was segmented automatically by the built-in segmentation tool in the review software. The choriocapillaris slab then was segmented with a thickness of 10 µm under 31 µm from the RPE layer.
14 Thereafter, the following processing was performed using the ImageJ software. Two choriocapillaris images generated from two different OCTA cube scan sets were stacked to create a two-frame image and were registered before multiple image averaging.
27 First, the two-frame stack of superficial slabs and choriocapillaris slabs was registered, according to previous reports.
28,29 After registration, the two-frame stacks of the choriocapillaris and superficial slabs were compounded into one image by projecting the average intensity (
Fig. 3A), and a central square area of 284 × 284 pixels was cropped. The averaged choriocapillaris slabs then were binarized for quantitative image analysis of the FD using the Phansalkar method (radius, 15 pixels).
14 To exclude shadows from confounding the analysis, a thresholded image of the large superficial retinal vessels was merged with the binarized choriocapillaris image (
Fig. 3A) according to previous reports.
14,30 After binarization, a 2.5-mm-diameter circle centered on each microperimetry measurement point was cropped. A 1-mm-diameter circle image was used as the foveal area, and a ring-shaped area excluding the 1-mm central circle was used for the parafoveal area, similar to a previous study.
15 The terms “foveal” and “parafoveal” were defined, respectively, by the area of the center and the area of the inner circle in the Early Treatment Diabetic Retinopathy Study (ETDRS) grid. The parafoveal area of the ETDRS grid generally is donut-shaped with an outer diameter of 3 mm and an inner diameter of 1 mm. However, the outer diameter of 2.5 mm was used in the current study to prevent the boundary edge of the OCTA images from being included in the selected area of analysis. The ratio of black pixels in the area, except for the superficial blood vessels, was calculated as the FD (%) (
Fig. 4). All OCTA parameters were analyzed after correction for the axial length of the eye.
31