Abstract
Purpose :
To develop ocular inserts comprised of polyvinyl alcohol (PVA) and gelatin methacrylate (GelMA), using 3D printing technology.
Methods :
Inserts were synthesized using a bioink formulation consisting of 10% (w/v) GelMA, 5% (w/v) and 7.5% (w/v) PVA, 0.6% (w/v) lithium phenyl-2,4,6-trimethylbenzoylphosphinate (LAP), and 5% (v/v) yellow dye as a light absorbing agent to improve print resolution. They had a 4mm diameter, 1mm thickness and were fabricated using a commercial masked-stereolithography (mSLA) 3D printer at 95% humidity and 37°C temperature. Morphology of the inserts was investigated by freeze-drying samples and imaging them using a scanning electron microscope (SEM). Release of PVA over 5 hours was studied by incubating at 35°C in PBS in an incubator shaker at 50rpm. The hydrogel samples were freeze dried and their equilibrium swelling was studied in PBS using gravimetric method.
Results :
The PVA-loaded ocular inserts were 3D printed within 30 minutes. SEM images showed that 7.5% PVA loaded inserts had more uniform pore size distribution compared to the gels with no PVA. Approximately 37% of PVA was released within the first 2 hrs from the inserts containing PVA, and the release continued up to approximately 4 hrs before reaching a plateau. The release kinetics can be attributed primarily due to passive diffusion. The swelling curves of these hydrogels suggest that they reach equilibrium swelling within 24hr. From the slope of the swelling curve in the first hour, it can be inferred that swelling happens at a slower rate for GelMA/PVA compared to GelMA alone. This slower swelling rate helps to control the release and supports a sustained release of PVA from the combination.
Conclusions :
This study showed that a GelMA-PVA based bioink can be used to 3D print ocular inserts that can release PVA for up to 4 hours. Future work will focus on designing 3D scaffolds to increase the release duration of PVA from these gels.
This abstract was presented at the 2024 ARVO Annual Meeting, held in Seattle, WA, May 5-9, 2024.